Messy Fuzz: Semi-Point-to-Point

I drew this up several months ago and just forgot to post it. :)

It's the same schematic as on the Fuzz Face Project posted some time back. In other words, it's a Fuzz Face with fixed gain and a bias knob.

This layout is to be used with a single 5x1 turret board, eyelet board, terminal strip, or whatever else you can solder to.

The bias control helps make just about any transistor pair with gains below about 300 hFE work, but extremes may necessitate a change in a resistor value here and there.

Enjoy!